Mitsubishi Electric AE-200A/AE-50A Instruction Book page 9

(2) Enter the user name and the password in the login screen, and click [Login]. A screen for monitoring the
operation conditions will appear.
The table below shows the web page addresses for building managers and general users, their respective
default user names and passwords, and their accessible functions.
User Web page address
http://[IP address of
Building
each AE-200/AE-50]/
manager
administrator.html
http://[IP address of
General
each AE-200/AE-50]/
user
index.html
Note: The license "Personal Web" is required to register up to 50 general users and to specify the accessible unit groups for
each general user. Refer to section 8-2 "User Registration" for details.
Note: It is recommended to change the default user name and password so that the users other than the building managers
and general users will not be able to change the settings.
Note: When one or more AE-50 controllers are connected, log in to the AE-50 Web browser to monitor or operate the units that
are under the control of AE-50 controllers. The Web browser cannot be switched between the AE-200 and the AE-50.
WT07139X01
Default Default
user name password
administrator admin
guest guest
9
Available functions
Condition List
Measurement List
Monitor/
Malfunction List
Operation
Filter Sign List
AHC List
Energy Use Status
Energy Ranking
Management Target Value Setting
Peakcut Control Status
Today's Schedule
Weekly Schedule 1
Weekly Schedule 2
Schedule
Weekly Schedule 3
Settings
Weekly Schedule 4
Weekly Schedule 5
Annual Schedule
Malfunction Unit Error
Log Communication Error
System Date/Time Settings
Settings User Registration
Send Mail Log
Gas Amount Check
Maintenance Outdoor unit status
Free Contact List
CSV output
Monitor/
Condition List
Operation