Table of Contents
Advertisement
4-1-5. Operating the units in a given block
(1) In the Block display of the Condition List screen, select a block to
operate, and click [Batch Operations].
If air conditioner group, LOSSNAY unit (ventilator) group, Air To Water
(PWFY) unit group, and general equipment group exist together in the
same block, a screen to select a group type will appear.
Click one of the group types to change its settings.
(2) On the operation settings screen, change the desired settings and
click [OK] to reflect the changes.
Click [Cancel] to return to the previous screen without making any
changes.
Note: When the filter sign is reset on this screen, the cumulative operation time
of all units will be reset, irrespective of whether or not the filter sign was
triggered. Reset the filter sign on this screen when the filters of all units
were cleaned at once.
4-1-6. Operating the units in all groups
(1) In the Overview (Floor Layout) display of the Condition List screen,
click [Batch Operations]. If air conditioner group, LOSSNAY unit
(ventilator) group, Air To Water (PWFY) unit group, and general
equipment group exist together in the same system, a screen to select
a group type will appear.
Click one of the group types to change its settings.
Note: To operate all HWHP (CAHV) unit groups, click [Batch Operations] in the
HWHP display of the Condition List screen.
(2) On the operation settings screen, change the desired settings and
click [OK] to reflect the changes.
Click [Cancel] to return to the previous screen without making any
changes.
Note: When the filter sign is reset on this screen, the cumulative operation time
of all units will be reset, irrespective of whether or not the filter sign was
triggered. Reset the filter sign on this screen when the filters of all units
were cleaned at once.
WT07139X01
19
Advertisement
Table of Contents
