Vitrifrigo DW90 OCX2 RFX Instruction Manual page 36

Replacing the door panel (CDW models)
Remove the drawer from the guides to remove the stainless steel front panel (Annex 5 -
Fig.2). Then follow the instructions in Annex 6 to remove the door panel.
Removing the drip tray ("DT" versions only)
Proceed as follows to extract the drip tray:
1. Disconnect the water drain pipe
2. Remove the fixing screws from the inside (Fig. 9.5)
3. Pull the drip tray downwards to release the fastening element on the bottom of the
tank (Fig. 9.6)
9.5
36 ENG
9.6