Connecting via WPS
- A home WiFi network is available.
- The signal of your WiFi network is
sufficiently strong in the place
where your hob is installed.
- There is no direct WiFi connection
between the hob and a Miele
cooker hood (Con@ctivity 3.0).
- You must have a WPS (WiFi pro-
tected setup) compatible router.
Commissioning
Touch the 0 and 6 sensor controls at
the same time for 6 seconds.
The seconds can be seen counting
down in the timer display. After the time
has elapsed, a progress light appears in
the timer display during the connection
attempt (for max. 120 seconds).
The WPS login is active during these
120 seconds.
Activate the WPS function on your
WiFi router.
If the connection was successful, the
code : appears in the timer display.
If the connection could not be estab-
lished, the timer display will show the
code :. You have probably not activ-
ated WPS on your router quickly
enough. Repeat the steps above.
Install the Miele app.
Follow the user navigation in the app.
You can use all Miele@home functions.
Tip: If your WiFi router does not support
WPS, please connect via the Miele app.
39