Table of Contents
Advertisement
Establishing a direct connec-
tion with the cooker hood
The hob requires max. 2 W in net-
worked standby.
Availability of the WiFi connection
The WiFi connection shares a frequency
range with other appliances (including
microwave ovens and remote control
toys). This can give rise to sporadic or
even complete connection failures.
Therefore, the availability of featured
functions cannot be guaranteed.
Establishing a direct connection with
the cooker hood
You can find the necessary information
on connecting the cooker hood in the
associated operating and installation in-
structions.
- Miele cooker hood with Con@ctiv-
ity 3.0
- The hob is not connected to your
home network (Miele@home)
Switch the hob on.
Touch the 0 and 7 sensor controls at
the same time for 6 seconds.
The seconds can be seen counting
down in the timer display. After the time
has elapsed, a progress light appears in
the timer display during the connection
attempt. If the connection was success-
ful, the code : appears in the timer
display. If the connection could not be
established, the timer display will show
the code :. Repeat the steps above.
When successfully connected, dis-
plays 2 and 3 will light up constantly on
the cooker hood.
To quit connection mode on the
cooker hood, press the run-on but-
ton .
Con@ctivity 3.0 is now activated.
Commissioning
41
Advertisement
Table of Contents
