Timer; System Lock; Safety Lock; Recall - Miele KM 7360 FR Operating And Installation Instructions

Table of Contents

Advertisement

Timer

The timer can be used for the following
two functions:
- For setting the minute minder
- For automatically switching a cooking
zone off
You can use the functions simultan-
eously.
Minute minder
You can set an alarm for activities that
are independent of the hob.
Auto switch off
You can set a time after which a cook-
ing zone will switch off automatically.
This function can be used for all cook-
ing zones at the same time.

System lock

If the system lock is activated, then the
hob cannot be switched on.

Safety lock

The safety lock is activated when the
hob is switched on. When the lock is
activated, the hob can be operated only
under certain conditions.

Recall

If the hob is switched off by mistake
during use, this function can be used to
reset all settings. For this to work, the
hob must be switched on again within
10 seconds of being switched off.

Keeping warm

This function enables food to be kept
warm after it has finished cooking.
The maximum duration for keeping food
warm is 2 hours.

Programming

You can adapt the programming of the
hob to your personal needs.

Demo mode

This function enables dealers to
demonstrate the hob without it heating
up.

Residual heat indicator

If the cooking zone is still hot, the resid-
ual heat indicator will light up after it
has been switched off.
The bars of the residual heat indicator
go out one after the other as the cook-
ing zone cools down. The last bar only
goes out when the cooking zone is safe
to touch.
Familiarisation
33

Advertisement

Table of Contents
loading

Table of Contents