Miele H 814 Operating Instructions Manual page 45

Instailatton - hobs
These hobs are classified in Germany
as 'Y" class for heat protection).
They must be positioned so that there
Is dOequate ventilation There may be
a wall at the rear and wal or taH unis
at one side. On the other side howev¬
er, no unit or divider must stand highef
than the hob.
ITiere must be a rntnlmum distance
of 30 mm between the hob unK and
adjacent furniture (e.g. tall wiit)
because of the heat radiated from
the hob.
KM 110, KM 114
Prepare the worktop cutKXJt as showr)
in the illijsiratioru below.
KM114
(with pot stand)
^
t
KM118
rhe template provicled wihi the hob
must be used when cutting out the
worktop. (cut>out wfth rounded edges).
Installation of the hob unit
• Loosen the screws.
a Set (he hob unit into the cut-out and
centre it
• Turn the screw lo the rght until the
clamps are ftrmly attached to (he
worktop.
• Check that the hob unit fits tightly
on to the worktop.
4S