Our company was founded in 1963 by the Lorenzo, Luigi and Warnings ......................25 Cleaning the appliance ................25 Paolo Cuppone brothers. It immediately specialized in the Downtime for prolonged periods ...........26 production of ovens and equipment to prepare and cook pizza.
Safety instructions • Read this guide carefully before using and main- butcher shops, etc., but not for the continuous cable, etc.), malfunction or fault, do not use taining the appliance, and keep it with care in an and mass production of food. A use other the appliance and contact a Service Centre accessible place for any future consultation by than the stated one is considered improper,...
Safety instructions Important safety precautions Fig. 1 Some parts of the equipment (e.g. The plates) can reach high temperatures. We advise you to avoid touching surfaces and not to get materials either flammable or sensitive to heat near the appliance. Do not place any solid or liquid objects on the product, above all if alcoholic or made of heat-sensitive materials.
Basic notions Knowing the appliance The appliance is a special press to form dough pizza disks. Its operation is quite simple: lowering the protection grille (1), the lower plate (3) approaches the upper distance set with lever (5); this one (2) until it reaches the After the way the dough ball is squashed between the plates.
Special functions: automatic Special functions: strike counter switching on Fig. 23 With the appliance display switched off (plug in, emergency The board is equipped with a special function for the automatic “+” (E) STOP key unlocked, ON/OFF key not ON), pressing the switching on of the appliance (countdown) after a certain displays for five seconds the number of strikes performed number of hours set by the user.
Maintenance and cleaning Warnings Cleaning the appliance switch off the Before any cleaning, it is necessary to Cleaning the external steel parts power to the appliance (acting on the system switch), Fig. 24 wear suitable personal protection equipment (e.g. Make sure that the power supply has been disconnected gloves, etc.) and wait for all parts of the appliance to cool down.
Need help?
Do you have a question about the LLKP30 and is the answer not in the manual?
Questions and answers