Table of Contents
Advertisement
Hazard warning device
Hazard warning Lamp
Press the hazard warning lamp switch. At
this time, the instrument cluster indicator
and the exterior turn signal will flash at the
same time to warn other road users; press
the hazard warning lamp switch again to
turn off the hazard warning lamp.
If the turn signal is operated when the
hazard warning lamp is turned on, it will
work first. After the turn signal is turned
off, the hazard warning lamp continues to
work. In order to reduce the risk of an
accident, the hazard warning lamp must be
turned on when necessary. Examples
include the following:
The vehicle breaks down due to
•
technical failure.
The vehicle is at the end of the vehicle
•
when there is a traffic jam.
In case of emergency.
•
The vehicle is towing another vehicle or
•
being towed.
If the turn signal on one side of the
instrument cluster flashes about
twice faster than usual, it indicates
that a turn signal lamp on the
corresponding
replace the bulb.
Warning triangle
On conventional roads, warning triangles
shall be placed 50 m to 100 m behind the
vehicle; on expressways, warning triangles
shall be placed 150 m away from the rear
of the vehicle. In case of rain and fog, the
distance shall be increased to 200 m.
The warning triangle is placed behind the
driver's seat.
107
Troubles in driving
side
fails.
Please
7
Advertisement
Table of Contents
