Table of Contents
Advertisement
High beam
With the low beam ON, push the light lever
away from your body to turn on the high
beam. Reset the operating lever and switch
back to low beam.
High beam flashing
Pull the operating lever towards your body
to turn on the high beam. After the handle
is released, the operating lever will
automatically reset and the high beam
lamps
will
automatically
Repeatedly operate the high beam flashing
to remind other road users.
Reasonably use the high beam.
Unreasonable use of high beams
may affect the sight of other traffic
participants and cause dazzle, which
may lead to accidents or serious
injuries.
The use of high beams is prohibited
in some road sections. Please pay
attention to the traffic regulations
when using high beams.
Turn signal
Pull the operating lever up and down to
the limit position, turn on the right or left
turn signal lamp, and the corresponding
turn signal lamp flashes continuously.
Lane change lamp function: Pull the
control lever up and down for a short
distance to the middle position, and the
right or left turn signal will flash. After
releasing it, the handle will automatically
return to its original position.
The steering lamp operating lever
has an automatic reset function. If
turn
off.
the angle of the steering wheel is too
small, it needs to be manually reset.
41
Instrument and control
3
Advertisement
Table of Contents
