Table of Contents
Advertisement
Instrument and control
indicates that the scale bar narrows from
wide to narrow (direction C), it means that
the wiping speed changes from fast to
slow.
When scrubbing the front windshield
or washing the vehicle, do not set the
wiper to "AUTO" gear. At this time,
the wiper may start automatically,
causing injury to the vehicle or
people.
Front wiper wipes at low speed
When the wiper control handle is in "O"
gear, pull two gears towards direction A to
perform low-speed wiping operation for
the front wiper.
Front wiper wipes at high speed
When the wiper control handle is in "O"
gear, pull three gears towards direction A
to perform high-speed wiping operation
for the front wiper.
Front windshield washer
Pull the wiper control handle towards
direction D. At the same time, the front
windshield washer sprays water, and the
wiper wiping starts. After releasing the
wiper control handle, the washer stops
spraying water, and the cleaning ends. The
wiper continues to work for about 4
seconds (2 ~ 3 cycles).
When the front windshield is dry, try
not to use wipers as much as
possible; otherwise, it will scratch the
glass and affect the service life of the
wiper blade. If there is dust or sand
on the windshield, please clear it
before using the wiper; if not, it will
scratch the glass and affect the
service life of wiper blade.
44
Advertisement
Table of Contents
