Table of Contents
Advertisement
vehicle is started or running, the warning
lamp will be on. Please contact a Farizon
Auto
after-sales
service
maintenance as soon as possible. If the
warning lamp turns on and off during
driving, and it does not turn on again, the
system can be deemed as normal.
If the ABS fault warning lamp stays
on, pull over the vehicle in a safe
place immediately and contact a
Farizon
Auto
station for maintenance as soon as
possible. In case of braking under
such circumstance, not only ABS will
fail, but also the vehicle will become
unstable at the time of braking.
Unfastened seat belt warning
lamp - red
When the Start switch is turned to ON
position, if the driver's seat belt or
passenger's belt is not fastened, the
warning lamp will stay on. The warning
lamp goes out after the driver or the
passenger has correctly fastened the seat
belt.
Electronic stability control
(ESC) indicator - yellow
The indicator flashes when the ESC system
works. If the ESC system fails and the
indicator lamp is always on, please contact
a Farizon Auto after-sales service station
for maintenance as soon as possible.
station
for
after-sales
service
37
Instrument and control
ESC OFF indicator - yellow
When the ESC system is turned off, the
indicator will be on. When the ESC system
is turned on again, this indicator will go out.
Charging cable connection
indicator - red
This indicator is used to indicate the
connection status of the charging cable.
When the charging cable is connected, this
indicator lights up. The vehicle cannot start
or move when the charger is connected.
Charging status indicator -
yellow
If this indicator is on, it indicates that the
power battery is being charged.
Powertrain fault warning
lamp - red
When the vehicle control system fails, the
warning lamp will be on. Please contact a
Farizon Auto after-sales service station for
maintenance as soon as possible.
Power limit indicator light —
yellow
When some specific faults occur in the
vehicle, the power of the vehicle will be
limited. This indicator is used to show the
power limit status. If the indicator is on, the
acceleration performance of the vehicle
will be greatly reduced.
3
Advertisement
Table of Contents
