Manual introduction and vehicle identification
Microwave window
The microwave window of the vehicle is
located on the upper right side in the
middle of the front windshield.
The vehicle electronic identification shall
not
be
blocked
components, such as ETC device and
sensor bracket.
This sign stores information about the
vehicle.
Please keep the windshield clean and
dry; do not film or stick metal
materials on the microwave window,
so as to ensure the standard
installation of automobile electronic
signs and effective reading of data.
Please do not block, squeeze or
disassemble
electronic signs!
damaged, please apply again at the
sign issuing agency in time.
by
other
mounting
the
automobile
If
the sign is
Vehicle sign
The vehicle nameplate is located at the
front door sill of B-pillar on the left side of
the
cab
and
information:
Name of Manufacturer
•
Certification No.
•
VIN code
•
Maximum allowable total mass
•
Allowable combined mass
•
Axle load of axle 1
•
Axle load of axle 2
•
Vehicle model
•
Dip angle of low beam
•
10
contains
the
following