Table of Contents
Advertisement
Starting and driving
Remote
control
replacement
If you find that the remote control key
control distance is close, or the remote
control function fails, or the vehicle cannot
identify the remote key as the key battery
capacity is low, it is necessary to replace
the key battery.
1.
Pry up the housing with a suitable tool,
and protect it with a piece of cotton
cloth during removal.
2.
Remove the remote control key battery
mounting plate and replace it with a
new one. Pay attention to the positive
orientation of the battery as indicated
on the circuit board. Remote control
key battery model: 3V, CR2032.
key
battery
80
3.
Snap the battery mounting plate and
remote control key housing in place.
A precision circuit is integrated within
the remote control key. Please take
care to protect the key from collision,
water, high temperature, humidity,
direct sunlight, solvent, wax and
detergent corrosion.
Do not expose the remote control
key directly to the environment
below
-20℃
otherwise, an alarm of low power
may appear because the chemical
non-reaction
characteristics. When there is a low
battery alarm of the remote control
key, please replace the battery in
time. This is to prevent the remote
control function from being affected,
causing failure of starting the vehicle
and affecting the use of the vehicle.
for
a
long
time;
of
battery
Advertisement
Table of Contents
