Table of Contents
Advertisement
Instrument and control
Daytime running lamp
When the vehicle power supply is in "ON"
mode, the daytime running lamps will be
automatically turned on; when the low
beam lamps are turned on, they will be
automatically turned off. After the low
beam is turned off, the daytime running
lamp will be automatically turned on.
Rear fog lamp
With the low beam ON, press this switch to
turn on or turn off the rear fog lamp
Follow me home
After the "Follow Me Home" function is
enabled, the headlamp will light up and go
out for a period of time when the vehicle
power supply is turned off. Tap "Vehicle
Settings - Follow Me Home" on the
central control screen menu to enable the
function and set the duration.
the "Follow Me Home" function time can be
set to 30 seconds, 60 seconds or 90
seconds.
Headlamp height adjustment
.
The knob is used to adjust the irradiation
height of the front combination lamp. The
front combination lamp height adjustment
knob has four positions: "0", "1",
"2" and "3".
It is recommended to set the knob
position according to the vehicle load
state:
Gear 0: There are people in front of
the car, and the cargo compartment
is empty;
Gear 1: The vehicle is full and the
cargo compartment is empty;
Gear 2: The vehicle and its cargo
compartment are full;
42
Advertisement
Table of Contents
