Table of Contents
Advertisement
4.12 Save measurements
The measurement can be saved by clicking the button "Save measurement" on the graph form. A new form is
displayed where information about the measurement can be entered.
In the textbox "Machine" the name or type of machine can be entered. With the drop list "Measurement series" the
measurement series that the measurement should belong to is selected. The textbox "No. in series" shows the
number the measurement gets in the series.
In the textbox "Measurement performed by" the person/company who performed the measurement is entered. The
textbox "Date" displays the date and time of the measurement. "Smart hardware ID" shows the ID number of the
Smart that the measurement was performed with. "Safety distance" shows the calculated safety distance for the
measurement if it exists. Additional information about the measurement can be entered in the textbox
"Measurement information". The textboxes to the right shows the names of the digital in and out signals used for
the measurement. The names can be changed before saving.
The button "Save" saves the measurement to the database and the button "Cancel" closes the form without saving.
2TLC172188M0201, rev. H
39
www.abb.com/lowvoltage
2012-01-03
Advertisement
Table of Contents
