Introduction For more information SM500F field mountable paperless recorder This publication details replacing an SM500F Further information is available from: paperless recorder’s color display assembly. The www.abb.com/recorders procedure must be carried out by a trained technician. The contents of the replacement kit or by scanning these codes: are shown in Table 1.
Referring to Fig. 4.2: 5. Disconnect the processor board flexi-cable E from the motherboard. Fig. 4.2 Disconnecting the processor board flexi-cable Fig. 4.5 Disconnecting the processor board IN/RandC/005-EN Rev. A | SM500F paperless recorder | Color display replacement (instruments manufactured from July 2016)
M in the mounting plate and position the display on the mounting plate. Secure the display to the mounting plate with 2 display securing screws L. SM500F paperless recorder | Color display replacement (instruments manufactured from July 2016) | IN/RandC/005-EN Rev. A...
We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.