Introduction For more information SM500F field mountable paperless recorder This publication details replacing an SM500F Further information is available from: paperless recorder’s color processor board. The www.abb.com/recorders procedure must be carried out by a trained technician. The contents of the replacement kit are or by scanning these codes: shown in Table 1.
5. Position the new processor board in the door housing and reconnect keypad membrane cable F, display flexi-cable E and processor board flexi-cable D. IN/RandC/004-EN Rev. A | SM500F | Field mountable paperless recorder...
User Guide (IM/SM500F), saving the configuration as the 'Current Configuration'. 8. Reset archiving as described in Section 5.2 of the User Guide (IM/SM500F). 4. Select any option from the list box and press SM500F | Field mountable paperless recorder | IN/RandC/004-EN Rev. A...
We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.