Table of Contents
Advertisement
4. Care and Maintenance
Before cleaning or attempting any type
of maintenance, always make sure that the
electricity supply is disconnected.
To avoid the possibility of fire, adhere
strictly to all of the recommendations included
in this booklet, paying particular attention to
the grease filters to ensure grease deposits do
not build up.
CAUTION: Accessible parts may become
hot when used with cooking appliances.
General cleaning
Wipe the external surfaces of the appliance
regularly using warm water and a mild
detergent. NEVER use abrasive cleaners,
or strong household cleaners as they may
affect the appearance of the product and/
or artwork on the control panel, voiding the
manufacturers warranty.
Grease filters
The grease filters should be cleaned every
three months or sooner depending on the type
of cooking being performed.
The grease filter is of a metallic material and
should be washed regularly using a neutral
detergent.
Grease filters should be washed separately to
crockery and kitchen utensils.
Grease filters should be thoroughly dried
before reinstalling on the hood.
(Illustration shows a generic
application, other installations
are similar.)
To remove the grease filter:
1. Push latch.
2. Lower filter and remove.
Install by reversing the process.
14
The manufacturer declines all liability in cases
where the instructions for the appropriate
installation, maintenance and use of the
cooker hood are not observed.
If the power cable is cut or damaged in any
way, disconnect the cooker hood from the
electricity supply and call the service number
on the rear cover of this booklet or a suitably
qualified repairer.
Stainless steel
The stainless steel must be cleaned regularly
to ensure long life. Dry with a clean soft cloth.
A specialised stainless steel cleaning fluid may
be used.
Note: Ensure that wiping is done along the
grain of the stainless steel to prevent any
unsightly criss-cross patterns appearing.
1
www.howdens.com
2
Advertisement
Table of Contents
