Table of Contents
Advertisement
Care and maintenance
Before cleaning or attempting any type of maintenance, always make sure that the electricity supply is disconnected.
To avoid the possibility of fire, adhere strictly to all of the recommendations included in this booklet, paying particular
attention to the grease filters to ensure grease deposits do not build up.
CAUTION: Accessible parts may become hot when used with cooking appliances.
If the power cable is cut or damaged in any way, disconnect the cooker hood from the electricity supply
and call the service number at the rear of this booklet or a suitably qualified repairer.
The manufacturer declines all liability in cases where the instructions for the appropriate installation, maintenance and
use of the cooker hood are not observed.
General cleaning
Wipe the external surfaces of the appliance regularly using warm water and a mild detergent. NEVER use abrasive
cleaners, or strong household cleaners as they may affect the appearance of the product and / or artwork on the control
panel, voiding the manufacturer's warranty.
Stainless steel
•
The stainless steel must be cleaned regularly to ensure long life.
Dry with a clean soft cloth. Specialised stainless steel cleaning fluid may be used.
•
Ensure that wiping is done along the grain of the stainless steel to prevent any
unsightly criss-cross patterns appearing.
Grease filter(s)
•
Grease filters should be cleaned every three months or sooner depending on the type of cooking being performed.
•
The grease filter is a metallic material and should be washed regularly using a neutral detergent.
•
Grease filters should be washed separately to crockery and kitchen utensils.
•
Thoroughly dry the grease filter before reinstalling on the cooker hood.
To remove the grease filter(s):
1
Open cover
2
Pull down latch to unlock
Install by reversing the process.
Exclusive to Howdens
3
Remove greese filter
9
Advertisement
Table of Contents
