Klarstein TURBODRAFT Manual page 82

EN
82
Important notes on operation
• Make sure the total power does not exceed 3600 W when the two cooking
zones on the same side are working at the same time. If the calculated total
power exceeds 3600 W during the setting process, reduce the power of one of
the two cooking zones.
• Simultaneously press the right and left bridge buttons to adjust the power of
all four cooking zones at the same time. Then press the left bridge button to
decrease maximum power or the right bridge button to increase maximum
power. There are 5 power levels: 2800 W, 3600 W, 4600 W, 5800 W, 7200 W .
If you do not adjust the maximum power for 30 seconds or press the power
button, the device will turn off.
• The extractor hood can be operated in two ways: in recirculation mode and
in exhaust air mode. Air recirculation mode is set by default. To switch the
extractor hood to exhaust air mode, switch off the hob and fan. Then press
the hob selection button and the fan button simultaneously for 3 seconds to
enter the switching mode. Then press the fan button several times to select
the following setting: [0] = recirculation mode or [1 = air extraction mode.
Heat output levels of the hob
Stage 0 1
Power (W) 0 100
Heat output levels of the hob in paired state
Stage 0 1
Power (W) 0 100
Fan levels and fan power
Stage 0 1
Air volume 0 400
(m /h)
3
Runtime (min)
2 3 4 5
200 300 600 1000
2 3 4 5
200 300 600 1000
2 3 4 5
450 500 530 560
Long-term operation
6 7 8 b
1400 1600 1800 2000
6 7 8 b
1200 1400 1600 1800
6 7 8 b
580 600 700 750
8 3