Klarstein TURBODRAFT Manual page 80

EN
80
Button function
Adjust speed of the fan
Linkage
Please note:
When the fan is turned on for the first time,
the pairing button will light up and the fan
will be in pairing state. Slide your finger
on the slider to set the desired fan speed
between 1-8. If you select [b] at the end of
the slider, the fan will run at the highest
speed. After 1 minute it then changes to
level 8 and after another 8 minutes to level
7. The display above the button shows the
current speed. If you press the button while
the fan is running, the fan will continue to
run for 1 minute and then turn off.
The linkage is activated when the appliance
is switched on for the first time and saves
the previous status each time the appliance
is switched on.
To activate or deactivate the hob and hood
linkage, press and hold the speed button for
3 seconds.
When the cooktop and range hood are
linked, the fan speed is synchronized with
the current cooktop speed.
Example: If the four cooking zones are set
to level 8, the fan will also be set to level
8. The highest fan speed is at level 9, the
lowest fan speed is at level 1.