Table of Contents
Advertisement
ABOUT THE PRODUCT
Transportation and Storage
it is recommended to store the unit in an upright position
and without water. During transportation, the unit can be
tilted up to 45 °C if it is done carefully and over short dis-
tances. The unit can be transported and stored within a
temperature range of -20 to +70 °C.
If transporting the heat pump with a forklift truck, it
should be placed on the provided base mount and lifted
slowly. Due to its high centre of gravity, the unit must be
secured to prevent it from toppling during transportation.
When using a sack trolley for transportation, it is impor-
tant to secure the unit to prevent slipping and avoid using
water pipe connections for transportation purposes.
Additionally, care should be taken to ensure that the
sack trolley does not cause damage to the cabinet and
connectors.
During unloading, it is important to place the unit on a
level surface to prevent damage.
Directions/Safety Instructions
• The unit's construction adheres to all EU regulations
(refer to the CE certificate for more information).
• Precautions must be taken against fire during mainte-
nance work that involves opening the coolant circuit,
especially if the work involves fire-related tasks such
as welding or soldering.
• Prior to commencing work on the unit, it is crucial to
disconnect all electrical connections.
• When connecting the unit, it is important to comply with
all relevant laws and regulations.
• The water used must be of potable grade, and if the water
pressure is high, a pressure reduction valve must be
installed.
• All connections related to potable water must be
certified. Note: Only a certified contractor should
perform any work.
4
Product Description
Use
The Combi Blueline is a combined ventilation unit and
domestic water heat pump which can be used for:
• Air Heating
• Domestic hotwater;
• Ventilation with heat recovery;
• Air cooling both passively using the built in bypass and
actively using the heatpump
Description
The Combi Blueline is a unit that comes ready to connect
and consists of several important components, including
the cabinet, tank, refrigerant, ventilation unit, heatpump
as well as a control unit. The Combi is provided with a heat
exchanger built in to the domestic hotwater cylinder with
an area of 0.75 m2, enabling connection to external heat
sources such as a solar heating system. By using residual
heat in the extracted air, the Combi Blueline heat pump
can heat the supply air or produce domestic hot water.
Throughout the year, the Combi Blueline unit can provide
a family's hot water needs by heating domestic water.
The tank has a built-in immersion heater, and sensors
placed at the bottom and in the middle of the tank used
for temperature regulation in the tank.
Advertisement
Table of Contents
Need help?
Do you have a question about the COMBI BLUELINE and is the answer not in the manual?
Questions and answers