Table of Contents
Advertisement
5
Rigging and sails
5.6
Deck fittings
General points
•
Inspect each piece of deck gear regularly (blocks, shackles, swivels, cams, etc): Check that
there is no cracking, corrosion or deformation.
•
When replacing a piece of deck gear, make sure that you use a model with the same
strength specifications.
•
Failing to check deck fittings regularly and to replace worn ropes means that a block or hoist
may suddenly break, causing an accident involving serious injury and damage to the boat.
Maintenance
•
Upon return from sailing always rinse the deck fittings with fresh water.
•
Wash deck gear regularly with a gentle soap, turning the sheaves of each block. Rinse
afterwards with fresh water.
•
Never use grease on deck fittings (except winches).
•
Never use caustic-based cleaning materials on deck fittings (such as some teak cleaners).
5.7
Winches
Manual winches
Do not leave loose ropes on the winches - secure them to cleats.
54
197875 RCD-2 / Index E
Advertisement
Chapters
Table of Contents
