Dmx-Protocol; Cleaning And Maintenance; Replacing The Fuse - EuroLite LED WF-10 DMX Water Effect User Manual

DMX-protocol

Control-channel 1 - Dimmer intensity
Decimal Hexad. Percentage
0 255 00 FF 0% 100%
Control-channel 2 - Movement
Decimal Hexad. Percentage
0 63 00 3F 0% 25%
64 127 40 7F 25% 50%
128 191 80 BF 50% 75%
192 255 C0 FF 75% 100%

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly. The cooling-fans should be cleaned monthly.
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
S/F
F Gradual adjustment of the dimmer intensity from 0 to 100 %
S/F
S Movement water effect and colors
S Movement colors, no movement water effect
S Movement water effect, no movement colors
S No movement water effect and colors
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Feature
Feature
CAUTION!
21/22 00057180.DOC, Version 1.0