Dmx-Controlled Operation; Addressing; Dmx-Protocol - EuroLite LED B-16 black 5W white DMX User Manual

DMX-controlled operation

You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. The individual channels and their features are listed under DMX-protocol.

Addressing

The Control Board allows you to assign the DMX starting address, which is defined as the first channel from
which the LED B-16 will respond to the controller.
If you set, for example, the address to channel 3, the LED B-16 will use the channel 3 to 4 for control.
Please, be sure that you don't have any overlapping channels in order to control each LED B-16 correctly
and independently from any other fixture on the DMX-chain.
If several LED B-16 are addressed similarly, they will work synchronically.
In order order to control the device via DMX, DIP-switch no. 10 must be set to OFF, the starting address is
selected via DIP-switches 1-9.
Note:
It's necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to
ensure proper transmission on the DMX data link.
Occupation of the DIP-switches:
Now you can start operating the LED B-16 via your lighting controller.

DMX-protocol

Control-channel 1 - PAN-rotation
Decimal Hexad. Percentage
0 9 00 09
10 120 0A 78
121 124 79 7C 47% 49%
125 245 7D F5 49% 96%
246 255 F6 FF 96% 100%
Control-channel 2 - Dimmer, Strobe
Decimal Hexad. Percentage
0 104 00 68
105 199 69 C7 41% 78%
200 250 C8 FA 78% 98%
251 255 FB FF 98% 100%
S/F
0% 4% S No rotation
4% 47% F Forwards PAN-rotation with increasing speed
S No rotation
F Backwards PAN-rotation with decreasing speed
S No rotation
S/F
0% 41% F Gradual adjustment of the dimmer intensity from 0 to 100 %
F Strobe-effect with increasing speed
F Fade in/Fade out with increasing speed
S On
Feature
Feature
22/23 00047163.DOC, Version 2.0