Table of Contents
Advertisement
Available languages
Available languages
Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 11 control channels. However, it
can also be switched to a mode with 3, 4, 6 or 8 channels, if different functions are required. To be able to operate
the device with a DMX controller, the device must be set to "Slave" via the Control Board. In addition, the DMX
starting address must be set. The starting address depends upon which DMX controller is being used. Please refer
to the controller's documentation.
1
Press the MENU button so many times until MASTSLAV is indicated on the display. Confirm with the ENTER
button. Set Slave with the UP and DOWN buttons. Confirm with the ENTER button.
2
Press the MENU button so many times until "DMX Chan" is indicated on the display. Confirm with the ENTER
button.
3
The display indicates 6 CH (6 DMX channels) or 3 CH (3 DMX channels), 4 CH (4 DMX channels), 8 CH (8
DMX channels) or 11 CH (11 DMX channels). Use the buttons UP and DOWN to select the desired DMX
channel mode. Confirm with the ENTER button.
4
Press the button MENU in order to return to the main menu.
5
Press the MENU button so many times until "DMX Addr" is indicated on the display. Confirm with the ENTER
button.
6
Use the buttons UP and DOWN to set the address. Confirm with the ENTER button.
7
Press the button MENU in order to return to the main menu.
8
When receiving DMX control signals, the
Note: Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX chain. If several devices are addressed to the same address,
they will work synchronously.
DMX protocol
3 channel mode
Channel
Value
1
0-255
2
0-255
3
0-255
4 channel mode
Channel
Value
1
0-255
2
0-255
3
0-255
4
0-255
6 channel mode
Channel
Value
1
0-255
2
0-255
3
0-255
4
0-255
5
0-255
6
0-14
15-255
symbol flashes slowly in the display.
Feature
Red, Green and Blue color mixing
White, 0 - 100 % increasing
Dimmer, 0 - 100 % increasing
Feature
Red, 0 - 100 % increasing
Green, 0 - 100 % increasing
Blue, 0 - 100 % increasing
White, 0 - 100 % increasing
Feature
Red, 0 - 100 % increasing
Green, 0 - 100 % increasing
Blue, 0 - 100 % increasing
White, 0 - 100 % increasing
Dimmer, dimmer intensity from 0 to 100 %
Strobe
LEDs on
Strobe effect with increasing speed
32/36
00151618, Version 1.0
Advertisement
Table of Contents
