Bartscher G-S7T2 Manual page 24

Error
Appliance does
not work
Appliance
switches on, but
the temperature
is too high/low
EN
22 / 24
Possible Cause
Incorrectly connected plug
Electric power supply safety
fuse damaged
No power supply
Damaged temperature
controller
Damaged mains power plug
Incorrect setting temperature
Too much ice on the
evaporator
Condenser clogged with dust
Door not closed properly,
door seals damaged
Direct sunlight or heat
sources in immediate vicinity
Air flow to condenser is
interrupted
Ambient temperature too
high
Unsuitable food products are
stored
Poor air circulation in the
appliance
Appliance is overfilled
Possible Malfunctions
Solution
Remove the plug and insert it
properly into a socket
Check the fuse, connect the
appliance to another socket
Check the electric power
supply
Contact the service company
Contact the service company
Correct the temperature
setting
Defrost the appliance
Contact the service company
Keep door closed, have
defective seals replaced by
service technician
Move the appliance away
from heat sources, place the
appliance in a correct position
Improve ventilation or move
the appliance to a cooler
location
Leave food products to cool
down before you place them
in the appliance
Clear ventilation openings of
the appliance
Avoid overfilling of the
appliance, remove the excess
of food product
200297