Table of Contents
Advertisement
Installation and operation
•
Do not plac e the applianc e in hot environment or in the vici nity of fl ammable materials .
•
The appliance requir es s ufficient airflow for pr oper operation. Ass ure a mini mum later al cl ear anc e of the appli ance of 10 c m.
•
Never cover nor bl oc k ventilation openings of the appli ance.
Unpacking / Positioning
•
Remove the appliance from the packaging and discard all the packing materials,
excluding the pallet.
CAUTION!
Choking hazard!
Prevent children from accessing packaging materials, for instance: plastic
bags and EPS elements.
•
To install the appliance, perform the following steps:
– The appliance may only be transported to installation location in vertical
position. In order to avoid damage to the compressor, do not tilt the
appliance more than 45° when positioning or transporting it.
– Lift the appliance with the lift truck and move it to the planned installation
location. Be careful not to damage the appliance. Control the stability in
order not to lose the balance of the appliance.
– Do not drag nor push the appliance, as it may fall down. This may also
cause the damage to external elements or swivel castors.
– Remove the appliance from the pallet in the installation location and
install it.
– Attach swivel castors with brakes.
•
If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
•
Be careful not to damage the rating plate and warning labels affixed to the
appliance.
•
Never place the appliance in humid or wet environment.
•
Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•
The appliance should be placed on a surface that is:
– even, with sufficient load-bearing capacity, resistant to water, dry and
resistant to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e to quic kl y disconnect the power c ord when nec ess ar y.
•
Nie nal eż y umies zcz ać urządz eni a w g orąc ym otoczeniu ani w pobliż u materiał ów łatwopalnyc h.
•
The appliance requir es s ufficient airflow for pr oper operation. Ass ure a mini mum later al cl ear anc e of the appli ance of 10 c m.
•
Die Öffnungen am Gerät niemals abdec ken oder bl oc ki eren.
200297
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e to quic kl y disconnect the power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e to quic kl y disconnect the power c ord when nec ess ar y.
EN
13 / 24
Advertisement
Table of Contents
