Table of Contents
Advertisement
COMMISSIONING THE SYSTEM
Verify System Operation
To commission the system, verify the following conditions are met:
•
With the casing still removed check the air curtain fans operate correctly and there is no
excessive mechanical noise. All fans are working.
•
Fans operate at Low, Medium and High speeds.
•
When heating is selected, the air stream from the discharge grille warms up across the whole
length of the air curtain.
•
Verify the operation of the Style
and increase the heating set point until the air stream warms up. Reduce the heating set
point until the airstream goes cold. Once all functional tests have been carried out and the
air curtain operates satisfactorily, hook and locate the inlet casing in between its fixing tabs
ensuring all fixing holes are correctly aligned with tab inserts. Secure panel using the
casing screws supplied.
•
Warm air reaches across the doorway with door open or closed.
•
For electric and water heated air curtains Controller operates correctly in both manual and auto
modes.
SIGN OFF
Complete the following once commissioning is completed:
Installer signature
Installer name
Installer company
Date
Version 5.0 (Original Manual)
INVISIDOR STYLE
AIR CURTAIN: Installation, Operation & Maintenance Instructions
2
remote control in Manual Mode. Then select Auto Mode
2
Customer signature
Customer name
Customer company
Date
Page | 26
Advertisement
Table of Contents
