Using The System - Biddle STYLE2 Series Installation Operation & Maintenance

INVISIDOR STYLE AIR CURTAIN: Installation, Operation & Maintenance Instructions
2

USING THE SYSTEM

Basic (Wall Controller) Operation
The air curtain can be operated using the wall controller. The wall controller must be connected via RJ
communications lead to CCS PCB.
Home Speed Up
Down
On/Off
Press and hold Home touchpad for 2 seconds to turn air curtain ON or OFF.
NOTE: If an electric heated air curtain is heating when switched off the fan will run-on for approximately
2 minutes to dissipate excess heat.
Manual/Automatic
With Controller turned ON tap Home touchpad to switch between Automatic and Manual mode.
for "Auto Mode" or for "Manual Mode".
The screen displays either
Heating level control
Manual mode
Select heating level and cycle between zero, half heat and to full heat with each short Up
or Down touchpad press.
Version 5.0 (Original Manual) Page | 18