Warranty - Biddle STYLE2 Series Installation Operation & Maintenance

COPYRIGHT
All the information and drawings in this manual are the property of Biddle and may not be used (other
than for the actual operation of the device), photocopied, duplicated, translated and/or be brought to
the attention of third parties without Biddle's prior written permission.
The name Biddle is a registered trademark.
Y

WARRANTY

Please refer to Biddle's Terms of Sales and Delivery for warranty and liability conditions. Biddle
excludes liability for consequential loss at all times and under all circumstances. Failure to adequately
maintain the unit may void the warranty. If any problems are encountered, please contact your
installer/supplier. Failing this, please, contact the Biddle warranty department.
Care has been taken in compiling these instructions to ensure they are correct. Biddle. disclaims all
liability for damage resulting from any inaccuracies and/or deficiencies in this documentation. Biddle
retain the right to change the specifications stated in these instructions.
Biddle Air Systems
St. Mary's Road Nuneaton
Warwickshire England
CV11 5AU
The units described in this manual are designed to be surface mounted inside a building and located
horizontally over a doorway or vertical on the side of the doorway. They must not be installed on the
outside of a building or built into a cabinet or recessed in any way.
Please complete the following details for your reference:
Date of Purchase:
Place of Purchase:
Serial Number:
Proof of purchase is required to make a claim under warranty.
Version 5.0 (Original Manual)
INVISIDOR STYLE AIR CURTAIN: Installation, Operation & Maintenance Instructions
2
Email: sales@biddle-air.co.uk
Tel: + 44 (0) 24 7638 4233
Fax: + 44 (0) 24 7637 3621
www.biddle-air.co.uk
Page | 2