Table of Contents
Advertisement
INVISIDOR STYLE
NOTE: A range of advanced factory fitted and plug-in control options are available from Biddle to enhance the
performance of the CCS PCB inside the air curtain. These include advanced weather compensation
control using a heating curve, outlet air temperature control, ECObus
modulating heater outputs and EEPROMs for non-standard control strategies. Visit the Biddle website
for details.
COMMISSIONING THE SYSTEM
Verify System Operation
To commission the system, verify the following conditions are met:
•
With the casing still removed check the air curtain fans operate correctly and there is no
excessive mechanical noise. All fans are working.
•
Fans operate at Low, Medium and High speeds.
•
When heating is selected, the air stream from the discharge grille warms up across the whole
length of the air curtain.
•
Verify the operation of the Style
increase the heating set point until the air stream warms up. Reduce the heating set point until
the airstream goes cold. Once all functional tests have been carried out and the air curtain
operates satisfactorily, hook and locate the inlet casing in between its fixing tabs ensuring all
fixing holes are correctly aligned with tab inserts. Secure panel using the casing screws
supplied.
•
Warm air reaches across the doorway with door open or closed.
•
For electric and water heated air curtains Controller operates correctly in both manual and auto
modes.
SIGN OFF
Complete the following once commissioning is completed:
Installer signature
Installer name
Installer company
Date
Version 3.0
COMPACT AIR CURTAIN: Installation, Operation & Maintenance Instructions
2
remote control in Manual Mode. Then select Auto Mode and
2
Customer signature
Customer name
Customer company
Date
®
BACnet/Modbus BMS control,
Page | 22
Advertisement
Table of Contents
