Biddle STYLE2 Series Installation Operation & Maintenance page 7

Wall and Ceiling Fixing
Before fitting the unit to the wall or ceiling ensure suitable wall fixing bolts are used, taking into account
unit weight (see Table 1)*.
Style horizontal air curtains are supplied with two steel wall or ceiling brackets fitted to each end of the
2
unit. Refer to Figure 3 for wall mounting details and Figure 4 and Figure 5 for ceiling mounting details.
Ensure all fixings are correctly fitted and securely tightened. Figure 5 shows special ceiling bracket for
use with drop rod covers designed to hide services.
* It is the sole responsibility of the installer to ensure that all the fixing points and suspension
system used are suitable for the air curtain being installed.
Lifting with Eye Bolts
A set of eye bolts are supplied with each horizontal air curtain to assist vertical lifting and positioning of
wall and ceiling mounted air curtains. The back panel case should be removed before lifting air curtain
into position with eye bolts. Using appropriate lifting equipment plan the safe and secure lift of the air
curtain.
Each eye bolt should be located and secured, as detailed in Figure 1, ensuring all the nuts are securely
tightened. Remove all eyebolts once the air curtain has been safely lifted and secured into position.
Figure 1 Lifting Air Curtain with Eye Bolts
Version 5.0 (Original Manual)
INVISIDOR STYLE AIR CURTAIN: Installation, Operation & Maintenance Instructions
2
Do not use at
less than 45°
Nuts must
be correctly
tighten
Page | 7