Standard Mode - Becker AR6201 Operating Instructions Manual

Operating Instructions
Frequency Selection Modes

2.5.1. Standard Mode

118.005
IC
SQL
127.000
Changing the preset frequency in standard mode:
118.005
SQL
128.000
118.005
SQL
128.000
118.005
SQL
128.000
16
• Press the "MDE" key until the standard mode page appears.
The active frequency is displayed in the top line and
o
preset frequency in the bottom line.
• Changing the active frequency is not possible in standard
mode (only available in direct tune mode).
• Changing the preset frequency is possible.
• Make a "short press" on the "ROTARY ENCODER" for
modification of the MHz digits.
o The editable digts are shown inverted.
• Rotate the "ROTARY ENCODER" clockwise/counter
clockwise to change the frequency in 1 MHz steps.
• Make another "short press" on the "ROTARY ENCODER" for
modification of the 100 kHz digits.
o The editable digts are shown inverted.
• Rotate the "ROTARY ENCODER" clockwise/counter
clockwise to change the frequency in 1 kHz steps.
• Make another "short press" on the "ROTARY ENCODER" for
modification of the 25/8.33 kHz digits.
The editable digts are shown inverted.
o
• Rotate the "ROTARY ENCODER" clockwise/counter
clockwise to change the frequency in 25/8.33 kHz steps.
• A short press of the "↨/SCN" key, exchanges active frequency
to preset frequency and vice versa.
While the transceiver operates in transmit mode, the
o
toggle function is disabled.
• Press the "STO" key to store the active frequency into the
next vacant memory place of the user channel database (see
"Frequency Storage Functions", page 20).
VHF Transceiver 620X 0638.420-071 Issue 04 12/2016