Using The Online Help; Setting Up The Project - ProSoft Technology PLX3 Series User Manual

PLX3x Series
Ethernet and Serial Gateways
2.2

Using the Online Help

Most of the information needed to help you use ProSoft Configuration Builder is
provided in a Help System that is always available whenever you are running
ProSoft Configuration Builder. The Help System does not require an Internet
connection.
To view the help pages, start ProSoft Configuration Builder, open the HELP
menu, and then choose CONTENTS.
2.3

Setting Up the Project

To begin, start ProSoft Configuration Builder (PCB). If you have used other
Windows configuration tools before, you will find the screen layout familiar.
ProSoft Configuration Builder's (PCB's) window consists of a tree view on the
left, and an information pane on the upper right side, and a configuration pane on
the lower right side of the window. When you first start PCB, the tree view
consists of folders for Default Project and Default Location, with a Default
Gateway in the Default Location folder. The following screen shows the PCB
window with a new project.
ProSoft Technology, Inc.
May 26, 2016
Configuring Your Gateway
User Manual
Page 17 of 218