Introduction
Congratulations on your purchase of the iSpring 6-stage RO system. Featuring a six-stage filtration
process, the Reverse Osmosis technology incorporates polypropylene sediment (PP), granular active
carbon (GAC), carbon block (CTO) filters and Corosex with calcite to provide crisp-tasting, bottled-
quality mineral water straight from your tap.
When properly maintained, this system will provide you with years of trouble-free service. The next
sections contain important information on the proper care and maintenance of your system. Please take a
few minutes to read through this information.
The cartridges in this system must be replaced on a regular basis to maintain efficiency and to ensure high
water quality. These cartridges work together and must be replaced every 6-12 months. Any significant
change in performance of the system should be investigated promptly to avoid secondary damage or
deterioration to other parts of the system.
CAUTION: Improperly installed systems could result in water damage due to leaks or flooding.
Proper installation of this system requires familiarity with standard sink plumbing and proper use
of common hand and power tools. If you are not familiar with standard sink plumbing and proper
use of common hand and power tools or have any difficulty with the installation of this system,
consult a licensed professional, such as a contractor or plumber.
NOTE: This system has been designed for installation by licensed professionals, such as a
contractor or plumber.
www.123filter.com
| (678) 261-7611
sales@ispringfilter.com
| Rev 03/14 | p2/10
Need help?
Do you have a question about the RCC7AK and is the answer not in the manual?