Advertisement
Available languages
Available languages
Delayed OTR
With this feature, the start time of an OTR recording can be
delayed.
:
;
(A) Press Delayed OTR (STARTZEIT) ll button 17. |
The Display shows: 'OTR', the programme number to be
recorded and the time at which the recording is to start (to the
nearest half hour).
On the TV screen the OSD information 'WAEHLE 'STARTZEIT"
UND 'STOPZEIT"' (select start and stop time) is shown:
OTR MIT WARTEZEIT
—
START.
19:26
STOP
WAEHLE "STARTZEIT"
UND 'STOPZEIT"
® Each time you press the Delayed OTR (STARTZEIT) lf button
again, the start time of the recording will be delayed by anomner
half hour (maximum 23,5 hours).
The TV screen shows:
OTR MIT WARTEZEIT
19:26
START
STOP
WAEHLE "STARTZEIT"
UND "STOP ZEIT"
Example:
- If you press button ill at 18:48, the recording. will start at the first
complete half hour, which is 19:00.
- Press button ill again. The recording start time will be delayed
for another half hour.
If you go too far, wait a few seconds.and press Delayed OTR -
(STARTZEIT) i button 17 again.
—
©r Press OTR (STOPZEIT) EJ button 16 to set the stop.time of
the recording. .
The TV screen shows:
OTR MIT WARTEZEIT
19:27
START
STOP
WAEHLE "STARTZEIT"
UND *STOPZEIT"
@
|fno OTR value is chosen within 8 seconds after pressing the
Delayed OTR (STARTZEIT) al button, the delayed OTR mode will
be cancelled automatically.
The previous mode is shown again.
®
Ifnecessary, adjust the programme number.
12
@®
Notes:
- If the maximum delay time for a delayed OTRis selected (23,5
.
hours) the recording will be made the following day, but the day
indicator on the Display remains unchanged.
- If you have loaded a protected cassette, 'SPER' flasheson the
Display and the TV screen shows 'CASSETTE GESPERRT'.
- If no cassette has.been loaded, 'CASS' flashes on the Display
and 'KEINE CASSETTE' flashes on the TV screen.
- During the waiting time before the delayed OTR recording takes
place, the video recorder can be operated normally. However, the
recording will only start if the video recorder is in the standby
mode.
- If the video recorder.is used manually at the time a delayed OTR
recording is to be made, the 'OTR' indicator flashes on the
Display.
Press Record (AUFNAHME)
@ button 13 to confirm that the
recording is to be made or press delayed OTR (STARTZEIT) fall
button 17 once to cancel the delayed OTR function.
- If the end of the tape is reached during recording, the cassette
is atomatically ejected.
Advertisement
