Advertisement
Available languages
Available languages
23 Eject (CASSETTE)
&
Press this button to eject the cassette from the video recorder. ©
The Display shows 'CASS' and the TV screen shows: ~
2000
@& KEINE CASSETTE
PR 02
12:14
24 On/Standby | ()
Pressing this button switches the ¥ideo recoraee on or in the .
standby mode: When the video recorder is in-standby, the Display
still shows the current time and weekday.
@ The video recorder should remain connected to the mains at all
times to ensure that timed recordings can be made and to enable
normal TV reception.
26 Sharpness control + /— (on rear)
Adjust this control during playback for a 'sharper' or 'softer'
picture according to your preference.
10
@®
Note:
If you want to display the OSD information select on the TV the
pre-selector reserved for the video recorder.
;
@) Press Up + and/or Down
— buttons 2 and 3 to select the TV
station to record from.
@ If necessary, select indicatin 'E' to record the input from an
external source via the AV Euroconnector @ 25.
(You can select 'E' by pressing Up + button 2 after programme
number '48' appears or pressing Down
— button 3 when after
programme number '1' appears or pressing button +) on the
remote control.)
f e .
Load an unprotected cassette and wind or rewind as
necessary.
The Display and the TV screen show 'STOP' and on the Display
the cassette-loaded [@g@) indicator lights up.
© Press Record (AUFNAHME)
@ button 13 when the TV
programme starts.
The Display shows 'AUFN' and the channel/programme number'
flashes for a few seconds.
The TV screen shows:
@
AUFNAHME
PR 03
Note:
;
The channel/programme number can be changed even after the
recording has started.
©) If you want to interrupt the recording temporarily, press
Pause/Still picture (PAUSE/STANDBILD) 8M button 18.
The Display shows 'PSE' and the TV screen shows:
gp PAUSE
~
PR 03
@ Press the Record (AUFNAHME) @ button again (within 8 -
minutes) if you want to resume recording. This ensures a clean
continuation ('automatic assembly').
e@ Press Stop & button 20 to stop the recording, or Eject
(CASSETTE) & button 23 to eject the cassette.
Advertisement
