Apartment Selection - Viking AES-2000F Technical Practice

A. Building Selection
The System Parameters pop up (right) (under the Setup menu)
is used to set up the various programmable features of each
entry system. Door strike timing, opener code, maximum call
time, ring count and silence time out are all programmable from
this screen. This screen also has a check box for disabling the
Keyless Entry Codes. This feature is useful when using card readers. By checking this box, a card can be used to gain access, but
trying to enter the card number as a keyless code will not work. To override this disable, just add a new tenant without any name, and
only enter the keyless code in the Apartment Selection screen.
B. Apartment Selection
This screen (far right) is used to set up the information on each of
the tenants in the building. New tenants can be added, and exist-
ing names and codes can be changed. When
using card readers, the keyless entry code feature
can be disabled in the system Parameters screen.
If you want to have a code that can override this
feature, enter a five digit code number in the
Keyless Code box, but do not fill in any other
boxes. That code can be used as a keyless code
even though keyless codes have been disabled.
If the apartment phone line is wired through a
Viking C-3000, the phone number field must start
with a "C".
The list can be sorted according to name, apart-
ment number, phone number, or code numbers by
selecting the "Sort" pull down (near right). Clicking on the Back button will bring up the previous screen "Building Selection", clicking
on the Next button will bring up the "Data Transmit" screen.
C. Transmitting Data to and from the AES-2000
After the PB-100 dials the phone number of the AES-2000 and creates a link, the Security Code screen
will pop up. If this is the first time the AES-2000 has been called, enter the security code "8,4,5,4,6,4".
Once in the Data Transmit screen, use the Security Code selection under the Tools pull down to change
the security code. If this screen is left blank, no code will be required. Keep in mind that while the PB-100
is linked to the AES-2000, ALL DOOR ENTRY FUNCTIONS ARE HALTED until the PB-100 hangs up.
1. Data Transmit Screen
The Data Transmit screen (right) is used to control the transfer of
information from the P.C. to the entry system. The data block size
and the number of retries can be tailored to fit any phone line
condition. The user has the option of sending all the records or
just sending the records that have been modified in the previous
screen by setting the "Show Changes Only" check off. If an AES-
NET card installed in the AES-2000 and a local card reader is
used, the AES-NET can be programmed using the Local Card
Reader selection of the Tools pull down. For more information on
programming the local card reader, refer to the AES-NET
Technical Practice. To go to the previous Apartment Selection
screen, click on the Back button. To go on to the audio recording
click on the Next button.
6.
The Remote Programming Software is capable of handling infor-
mation on many different buildings. The Building Selection screen
(left) displays the information on each building. This screen also
allows the user to add a new building, or drop an old one. Pressing
the Next button will bring up the "Apartment Selection" screen.