Apartment Selection; Data Transmit - Viking AES-2000 Technical Practice

A. Building Selection
Parameters pop up (right) is used to set up the various programmable
features of each entry system. Door strike timing, opener code, maxi-
mum call time, ring count and silence time out are all setable from this
screen.
B. Apartment Selection
C. Data Transmit
D. Recordings
The Recordings screen is used to make an audio recording of each of
the names of the tenants. These are the recordings that a user will hear
when the user is stepping through the directory of the AES-2000. When
in the record mode, the software will step through each name, display-
ing it in large letters, and prompting the user as when to speak. After
each recording is made, the software plays it back automatically, and
selects the next name from the list. Completed recordings are listed in
the box on the right hand side. To go back to the data mode, click on
the left arrow button. To end the session, click on the Exit button.
This screen (below right) is used to set up the information on each of the tenants in the building. New ten-
ants can be added, and existing names and codes can be changed.
The Remote Programming Software is capable of handling information on
many different buildings. The Building Selection screen (left) displays the
information on each building. This screen also allows the user to add a new
building, or
drop an old
one. Pressing
the right arrow
button will
bring up the
" A p a r t m e n t
S e l e c t i o n "
screen.
The System
The list can be sorted according to name, apartment number, phone
number, or code numbers by selecting the "Sort" pull down (far left).
The Data Transmit screen is used to control the transfer of information
from the P.C. to the entry system. The data block size and the number
of retries can be tailored to fit any phone line condition. The user has
the option of sending all the records or just sending the records that
have been modified in the previous screen by setting the "Show All"
check off. To go to the previous Apartment Selection screen, click on
the left arrow button. To go on to the audio recording click on the right
arrow button.
Clicking on the
left arrow will
bring up the pre-
vious screen,
Building Selec-
tion, clicking on
the right arrow
will bring up the

"Data Transmit"

screen.