Viking AES-2000F Technical Practice page 7

2. Download Names Screen
3. Download Statistics Screen
The Download Statistics screen (right) allows the user to
retrieve the AES-2000's building entry log. Each time the
AES-2000 energizes the door strike, it adds to the log,
recording the date, time name/type (tenant allowing the
entry) and code (type of actuation). Up to 1024 entries can
be stored before the oldest entry is written over. Retrieving
just a portion of the log can be accomplished by entering a
"Read Pointer" value for the starting point and a "Count"
value for the ending point. To receive the AES-2000's
existing data, click on "Download" and to clear all existing
data click on "Reset". Clicking "Close" will return the user
to the Data Transmit Screen.
4. Entry Points Screen
D. Recordings
The Recordings screen (right) is used to make an audio
recording of each of the names of the tenants. These are the
recordings that a user will hear when the user is stepping
through the directory of the AES-2000. When in the record
mode, the software will step through each name, displaying it
in large letters, and prompting the user as when to speak.
After each recording is made, the software plays it back auto-
matically, and selects the next name from the list. Completed
recordings are listed in the box on the right hand side. To go
back to the data mode, click on the Back button. To end the
session, click on the Exit button.
If remote ES-3 modules are installed, the Entry Points screen (left) is used to program
each ES-3. When this screen is invoked, fill in group and rotary switch setting for the
ES-3 that you wish to program. It is best to click on Get Status to retrieve the present
settings. Any changes can be entered directly into the data boxes. For more details
on programming the ES-3, refer to the ES-3 Technical Practice.
The Download Names screen (left) is used to retrieve the
tenant names, phone numbers, access codes and key-
less entry codes that have been previously programmed
into the AES-2000. The "Present ID" box contains the ID
number of the first record to be downloaded. The tenant
ID is an unchangeable consecutive number assigned to
the tenant when they were added to the database. The
"Download Count" box contains the total number of
records to be downloaded. Clocking on "Download" will
retrieve all records starting with the "Present ID" through
the Download Count. Once the records are displayed in
the data field, the "File" pulldown menu can be used to
print or save the data. Clicking on "Clear" will clear data
fields and reset the present ID to 1. Clicking on "Close"
will return the user to the Data Transmit Screen.
7.