Mercedes-Benz GLE 2022 Operator's Manual page 504

502 MBUX multimedia system
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Quarter mile race
Select Z Drag race options.
#
Select Quarter-mile.
#
Set a target distance.
#
Measurement stops as soon as the specified
target distance has been reached.
Start off and begin the measurement.
#
Measurement begins when the vehicle accel-
erates. Timing runs until the target distance or
a maximum of one mile has been travelled.
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Measuring braking
Z Drag Race options
#
Select Braking.
#
Set a starting speed or select Automatic.
#
Start off and begin the measurement.
#
Brake to a stop.
#
Measurement is incremental, in steps of
10 km/h to a stop. If the braking procedure is
started e.g. at a speed of 157 km/h, meas-
urement starts as soon as 150 km/h has
been reached
Storing and calling up measured values
If measurement is completed or cancelled, a
prompt appears asking whether the measurement
should be saved.
Confirm the prompt with OK
#
Calling up saved measurements
± Select History.
#
Select Acceleration, Quarter-mile
#
Select a measurement.
#
The desired measurement is displayed in
detail.
or
Delete a measurement.
#
F167 0009 02
Calling up the telemetry display
Multimedia system:
TRACK PACE
4
The telemetry display shows current vehicle data
as a digital value and as a diagram. Up to four
parameters can be selected to be shown on the
display.
For example:
Engine speed
R
to save.
Wheel angle
R
speed
R
Steering angle
R
or Braking. Set the desired parameters.
#
Set the time.
#
The set parameters are evaluated in the dia-
gram for the selected time.
Configuring AMG TRACK PACE
Requirements
To connect a mobile device to the TRACK PACE
app:
Telemetry
5