Mercedes-Benz GLE 2022 Operator's Manual page 625

Hide thumbs Also See for GLE 2022:
Table of Contents

Advertisement

To avoid damage to your vehicle, observe the fol-
lowing when using a high-pressure cleaner:
The key is at a minimum distance of 3 m from
R
the vehicle. Otherwise, the tailgate could open
unintentionally.
Maintain a distance of at least 30 cm to the
R
vehicle.
Vehicles with decorative foils: Parts of your
R
vehicle are covered with a decorative foil.
Maintain a distance of at least 70 cm between
the foil-covered parts of the vehicle and the
nozzle of the high-pressure cleaner. Move the
nozzle of the high-pressure cleaner around
whilst cleaning. The water temperature of the
high-pressure cleaner must not exceed 60°C.
Observe the information on the correct dis-
R
tance in the equipment manufacturer's oper-
ating instructions.
Do not direct the nozzle of the high-pressure
R
cleaner directly at sensitive parts, e.g. tyres,
gaps, electrical components, batteries, illumi-
nants or louvres.
Washing the vehicle by hand
* NOTE Engine damage due to water ingress
Take care not to point the water jet
#
directly towards the air inlet grille below
the bonnet.
Observe the relevant legal requirements (e.g. in
some countries, washing by hand is permitted
only in specially designated wash bays).
Use a mild cleaning agent (e.g. car shampoo).
#
Wash the vehicle with lukewarm water using a
#
soft car sponge. When doing so, do not
expose the vehicle to direct sunlight.
Carefully hose the vehicle off with water and
#
dry using a chamois.
%
Observe the notes on the care of car parts
(
page 625).
/
Notes on paintwork/matt finish paintwork care
To avoid damaging the paintwork and interfering
with the driving assistance systems, please
observe the following notes:
F167 0009 02
Maintenance and care 623
Paint
Insect remains: Soak with insect remover and
R
rinse off the treated areas afterwards.
Bird droppings: Soak with water and rinse off
R
afterwards.
Tree resin, oils, fuels and greases: remove by
R
rubbing gently with a cloth soaked in petro-
leum ether or lighter fluid.
Coolant and brake fluid: remove with a damp
R
cloth and clean water.
Tar stains: use tar remover.
R
Wax: use silicone remover.
R
Do not attach stickers, films or similar materi-
R
als. Only have film attached to the bumper at
a qualified specialist workshop.
Remove dirt immediately, where possible.
R
Matt finish
Only use care products approved for
R
Mercedes-Benz.
Do not attach stickers, films or similar materi-
R
als. Only have film attached to the bumper at
a qualified specialist workshop.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents