Mercedes-Benz GLE 2022 Operator's Manual page 573

Select Accept & start.
#
%
It is possible at any time to switch between
®
connection via Bluetooth or Android Auto
(wireless) in the device list.
%
If you have already connected a mobile phone
®
via Bluetooth , you can connect another
®
mobile phone via Bluetooth
Auto via the device manager.
Exiting Android Auto
Select ©.
#
or
Press the © button on the Touch Control
#
(MBUX multimedia system).
%
If Android Auto was not displayed in the fore-
ground before disconnecting, the application
starts in the background when reconnected.
You can call up Android Auto using the
Android Auto symbol in the status line.
▌Calling up the Android Auto sound settings
Multimedia system:
© Settings System
4 5 5
Select the sound settings.
#
▌Ending Android Auto
Select the Android Auto symbol in the device
#
manager (telephone, media) that is next to the
device name of the mobile phone.
%
Select the Android Auto symbol in the device
manager if Android Auto should be restarted.
%
If Android Auto was not displayed in the fore-
to use Android
ground before disconnecting, the application
starts in the background the next time it is
started automatically. You can call up Android
Auto using the Android Auto symbol in the
status line.
Transferred vehicle data with Android Auto and
Apple CarPlay
▌Overview of transferred vehicle data
When using Smartphone Integration, certain vehi-
cle data is transferred to the mobile phone. This
enables you to get the best out of selected mobile
phone services. Vehicle data is not directly acces-
sible.
The following system information is transmitted:
Audio
5
Software release of the multimedia system
R
®
F167 0009 02
MBUX multimedia system 571
System ID (anonymised)
R
The transfer of this data is used to optimise com-
munication between the vehicle and the mobile
phone.
To do this, and to assign several vehicles to the
mobile phone, a vehicle identifier is randomly gen-
erated.
This has no connection to the vehicle identifica-
tion number (VIN) and is deleted when the multi-
media system is reset ( page 498).
/
The following driving status data is transmitted:
Transmission position engaged
R
Distinction between parked, standstill, rolling
R
and driving
Day/night mode of the driver's display
R
Drive type
R
The transfer of this data is used to alter how con-
tent is displayed to correspond to the driving sit-
uation.
The following position data is transmitted:
Coordinates
R