Mercedes-Benz GLE 2022 Operator's Manual page 189

To raise: pull the head restraint up.
#
To lower: press release knob
#
tion of the arrow and push the head restraint
down.
Vehicles with a third row of seats
The head restraints on the third row of seats have
a usage position and a non-usage position. The
usage position is the extended, top position in
which the head restraint engages; the non-usage
position is the bottom, retracted position of the
head restraint. If the seats on the third row of
seats are being used, the head restraint must be
in the top, engaged usage position.
If the third row of seats is occupied: move the
#
head restraints to the very top and have them
engage there.
If the third row of seats is not occupied: move
#
the head restraints to the very bottom.
▌Fitting/removing the rear seat head restraints
& WARNING Risk of injury due to head
restraints not being fitted or being adjus-
ted incorrectly
If head restraints have not been installed or
have not been adjusted correctly, there is an
1 in the direc-
increased risk of injury in the head and neck
area, e.g. in the event of an accident or when
braking.
Always drive with the head restraints fit-
#
ted.
Before driving off, make sure for every
#
vehicle occupant that the centre of the
F167 0009 02
Seats and stowing 187
head restraint supports the back of the
head at about eye level.
Do not interchange the head restraints of the
front and rear seats. Otherwise, you will not be
able to adjust the height and angle of the head
restraints correctly.
Removing
Depending on the vehicle equipment, you can
remove the head restraints in the rear.