Mercedes-Benz GLE 2022 Operator's Manual page 332

330 Driving and parking
Make sure that the socket cover is
#
closed properly before closing the socket
flap. This can otherwise result in damage
which may prevent the socket flap from
being opened again.
Requirements
The distance between the key and the vehicle
R
does not exceed 1 m.
Depending on the vehicle's equipment and on the
national version, your vehicle is equipped with one
of the following vehicle sockets:
Type 1 for charging with alternating current
R
(mode 2 or 3)
Combo 1 for charging with alternating current
R
(mode 2 or 3) and charging with direct current
(mode 4)
Type 2 for charging with alternating current
R
(mode 2 or 3)
Combo 2 for charging with alternating current
R
(mode 2 or 3) and charging with direct current
(mode 4)
Combo 1 vehicle socket
%
Vehicles equipped with a type 1 vehicle
socket for AC charging have no charging inter-
ruption button 3.
F167 0009 02
Combo 1 vehicle socket: press charging inter-
#
ruption button 3.
The charging process is ended. The % indi-
cator lamp 1 lights up white. The vehicle
socket is unlocked.
Type 1 vehicle socket: unlock the vehicle.
#
The charging process is ended. The % indi-
1
cator lamp lights up white. The vehicle
socket is unlocked.
Press and hold button 2 on the charging
#
cable connector and remove the charging
cable connector from the vehicle socket.
%
If you cannot remove the charging cable con-
nector, repeat the unlocking procedure. If the
charging cable connector is still locked, con-
tact a qualified specialist workshop.
Close the socket cover and the socket flap.
#
Remove the charging cable connector from
#
the mains socket, or from the socket on the
wallbox/charging station, and stow the vehi-
cle's charging cable safely in the vehicle
( page 319).
/