Page 2
OUTBREAK SETUP MANUAL Lay out OUTBREAK and peg out Identify poles corners indicated below. Only anchor pegs half way at this point. Insert 1 x body pole over pin & rings. Attach top 2 clips only.
Page 3
OUTBREAK SETUP MANUAL Repeat step 3 for second body pole. Attach all pole clips. Alternate from left to right to keep pole tension balanced. Fit Ridgepole by inserting spigots into holes at peak of body poles. Tension using trigger lock. Attach 2 x pole clips.
Page 4
OUTBREAK SETUP MANUAL Unzip external zips on each side of the gusseted windows and peg out. Tension guy ropes with tensioner pictured below. Repeat for windopw other side. Swag set up complete...
Page 5
*awning poles sold seperatley Place flysheet over swag and attach 4 x hook & loop straps on each corner to OUTBREAK body poles (fig.1) Attach 4 x shock cord hooks on each corner to upper side pole clip (fig. 2) fig.
Page 6
OUTBREAK SETUP MANUAL Swag set up complete WARRANTY 23ZERO will replace or repair any product at its discretion that is subject to faulty manufacturing or workmanship including materials. Exclusions The above warranty is limited to manufacturing and materials defects. Not including damage caused by misuse or abuse, wear and tear, condensation, extreme weather, accidents, incor- rect set up, damage caused by mould, insects, animals or children.
Need help?
Do you have a question about the OUTBREAK and is the answer not in the manual?
Questions and answers