Table of Contents
Advertisement
System settings
Filling the dis-
pensing system
Filter mainten-
ance
56
Fill dispensing system
The
pensing system. The function must be carried out after a container for
process chemicals is filled or replaced with a full container.
The function can only be carried out if there is no load carrier in the
wash chamber.
Press the
Fill dispensing system
Press the button for the required dispensing system, e.g.
The individual steps are shown on the display during the process.
Once the process has finished, a message will appear on the display:
Dispensing system DOS 1 filled.
or
Dispensing system DOS 1 not filled. Repeat Fill dispensing system.
Press OK to confirm the message.
If the process of filling a dispensing system is not repeated suc-
cessfully, contact the Customer Service Department.
If the machine is equipped with a drying unit, the coarse and fine fil-
ters inside the drying unit must be replaced by the Miele Customer
Service Department at regular intervals.
You can read off the operating times and the times left for the indi-
vidual filters in the
Filter maintenance
function is used to prime the relevant dis-
button.
menu.
DOS 1
.
.
Advertisement
Table of Contents
