Table of Contents
Advertisement
4.3 Function Key
Press and hold for 5
seconds
Press and hold for 10
seconds
Short press
Note
4.4 Sleeping Mode
The device is on and in the
network
The device is on but not in
the network
4.5 Low Voltage Warning
Low Voltage
Turn off
Long press the function key for 5 seconds and the green indicator flashes once.
Release the function key and the green indicator flashes 10 times.
The green indicator remains off: Fail
Reset to factory setting / Turn off
The green indicator flashes 20 times: Success
Long press the function key for 5 seconds the green indicator flash once.
Keep pressing the function key for more than 10 seconds, the green indicator flashes 20 times.
The green indicator remains off: Fail
The device is in the network: green indicator flashes once, screen refreshes once, and send a data report
The device is not in the network: screen refreshes once and the green indicator remains off
User should wait at least 3 seconds to press the function key again or it would not work properly.
Sleeping period: Min Interval.
When the reportchange exceeds the setting value or the state changes, the device will send a data report
based on the Min Interval.
1. Please remove the batteries when the device is not in use.
2. Please check the device verification information on the gateway.
3.2 V
6
Advertisement
Table of Contents
